Products we supply.

Refined fuels, residual oils, liquefied gases and specialty products, sourced from verified refineries and producers and shipped with an independent certificate of quality.

Diesel and gas oils

Middle distillates for road transport, machinery and power.

Fuel tank truck on the road EN 590

Diesel EN590 10 ppm

Ultra-low sulphur diesel to the European EN 590 standard, for modern engines and emission-controlled fleets.

Key specifications

Sulphur
10 mg/kg max
Density at 15 °C
820–845 kg/m³
Cetane number
51 min
Flash point
Above 55 °C
Viscosity at 40 °C
2.0–4.5 mm²/s

Used for

  • Road transport
  • Agriculture
  • Industrial machinery
  • Generators
Refinery pipework Gas oil

Automotive Gas Oil (AGO)

General-purpose diesel fuel for trucks, buses, heavy equipment and stationary engines in markets without EN 590 requirements.

Key specifications

Sulphur
500 ppm max (lower on request)
Density at 15 °C
820–870 kg/m³
Cetane index
45 min
Flash point
55 °C min

Used for

  • Trucks and buses
  • Mining equipment
  • Rail
  • Power back-up

Gasoline

Motor spirit for retail networks and fleet operators.

Refinery with red and white pipes EN 228

Gasoline (RON 92 / 95)

Unleaded motor gasoline in regular and premium grades, supplied to distributors and retail fuel networks.

Key specifications

Grades
RON 92 and RON 95
Sulphur
10 mg/kg max (EN 228)
Density at 15 °C
720–775 kg/m³
Benzene
1.0 % vol max

Used for

  • Retail fuel stations
  • Passenger vehicles
  • Fleet fuelling

Aviation fuels

Turbine fuels for airlines, airports and aviation operators.

Airliner on the apron at sunset DEF STAN 91-091

Jet Fuel A1

Kerosene-type aviation turbine fuel meeting the AFQRJOS checklist, used by commercial airlines worldwide.

Key specifications

Density at 15 °C
775–840 kg/m³
Flash point
38 °C min
Freezing point
−47 °C max
Sulphur
0.30 % mass max
Net heat of combustion
42.8 MJ/kg min

Used for

  • Commercial aviation
  • Private jets
  • Helicopter operations
Tanker ship viewed from above Trade grade

Kerosene Colonial Grade 54 (JP54)

Colonial grade aviation kerosene widely traded for turbine engines and ground support, supplied with a full certificate of quality.

Key specifications

Density at 15 °C
775–840 kg/m³
Flash point
38 °C min
Freezing point
−47 °C max
Smoke point
25 mm min
Aromatics
22 % vol max

Used for

  • Turbine engines
  • International airlines
  • Ground support equipment

Fuel oils

Residual fuels for power stations, boilers and shipping.

Industrial plant with smoke GOST 10585

Mazut M100

Heavy residual fuel oil for boiler houses, thermal power plants and industrial furnaces.

Key specifications

Viscosity at 100 °C
50 mm²/s max
Flash point (open cup)
110 °C min
Pour point
+25 °C max
Water
1.0 % max
Sulphur
Up to 3.5 % by type

Used for

  • Thermal power plants
  • Industrial boilers
  • Furnaces
Factory with smokestacks Virgin residual

D6 Virgin Low Pour Fuel Oil

Straight-run residual fuel oil with a low pour point for easier handling, used in power generation and refinery blending.

Key specifications

Viscosity at 50 °C
700 cSt max
Flash point
65 °C min
Pour point
30 °C max
Sulphur
3.5 % max
Water
1.0 % max

Used for

  • Power plants
  • Refinery feedstock
  • Industrial boilers
  • District heating
Tanker ship at sea ISO 8217

Fuel Oil CST 180 / 380

Marine and industrial fuel oil in 180 and 380 centistoke grades, in high-sulphur and very-low-sulphur versions.

Key specifications

Grades
180 cSt and 380 cSt
Density at 15 °C
991 kg/m³ max
Flash point
60 °C min
Sulphur
3.5 % (HSFO) / 0.5 % (VLSFO)
Water
0.5 % max

Used for

  • Marine propulsion
  • Power generation
  • Cement kilns

Liquefied gases

LPG and LNG for utilities, distributors and industry.

Gas processing plant Propane / butane

Liquefied Petroleum Gas (LPG)

A propane and butane blend stored under moderate pressure, mixed to the buyer's ratio for heating, autogas and feedstock.

Key specifications

Composition
Propane / butane blend
Vapour pressure at 37.8 °C
1,430 kPa max
Relative density at 15 °C
0.50–0.58
Total sulphur
185 mg/kg max

Used for

  • Cooking and heating
  • Autogas
  • Petrochemical feedstock
Ship sailing at sunset Cryogenic

Liquefied Natural Gas (LNG)

Natural gas cooled to −162 °C for transport by sea, supplied from major liquefaction terminals.

Key specifications

Methane content
85 % min
Temperature
−162 °C
Density
430–470 kg/m³
Gross heating value
About 54 MJ/kg

Used for

  • Power generation
  • Industrial heat
  • LNG bunkering
  • City gas

Specialty and petrochemical products

Base stocks, solid fuels and fertiliser traded alongside our fuels.

Refinery distillation tower API groups

Base Oil (Group I, II, III)

Refined base stocks used as the main component of lubricants, greases and specialty fluids.

Key specifications

Groups
I, II and III
Viscosity index
80–130+
Pour point
−9 to −18 °C
Flash point
200 °C min

Used for

  • Engine oils
  • Industrial lubricants
  • Greases
  • Metalworking fluids
Industrial plant in black and white Fuel and calcined

Petroleum Coke

A carbon-rich solid from refinery coking units, supplied as fuel-grade green coke or calcined coke for industry.

Key specifications

Grades
Fuel grade (green), calcined
Fixed carbon
85–90 %
Sulphur
3–6.5 % (fuel grade)
Volatile matter
8–12 %
Calorific value
About 8,000 kcal/kg

Used for

  • Cement kilns
  • Power plants
  • Aluminium anodes
  • Steel making
Industrial plant with smokestacks 46 % N

Urea (Prilled and Granular)

High-nitrogen fertiliser in prilled and granular form, also used in industry and diesel exhaust fluid.

Key specifications

Nitrogen
46 % min
Biuret
1.0 % max
Moisture
0.5 % max
Prilled size
1–2.8 mm (90 % min)
Granular size
2–4 mm (90 % min)

Used for

  • Agriculture
  • Fertiliser blending
  • Industrial use
  • AdBlue / DEF

Specifications shown are typical limits for each grade. The binding specification for every cargo is the one in your contract, confirmed by an independent inspector at the load port.

Independent inspection

Quality and quantity confirmed by SGS or an equivalent inspector.

Full documentation

Certificate of quality, origin and bill of lading on every lot.

Flexible delivery

By vessel, rail tank car or truck, on FOB, CIF or DAP terms.

Secure payment

Documentary letter of credit or bank transfer.

Need a grade that is not listed?

Send us the specification you need. We will tell you within one business day whether we can supply it.